Štětec pro přesný korektor a opravu skvrn W0639 – Dark Sharm

€17,00 EUR

~~€17,00 EUR~~ €17,00 EUR

Vyprodáno

OXXO

Skladem

OXXO
OXXO

OXXO

Fundáčový kartáč a kartáč pro suché textury W0644 — Taklonové vlákna od ENCANTO

Precision Concealer Brush for Under-Eye & Spot Correction | CTR Group

€22,00 EUR

~~€22,00 EUR~~ €22,00 EUR

CTR W0611 plně krycí kartáč na make-up základ, černý styl, plný zobrazení na bílém pozadí, laserově zpracovaný syntetický materiál — CTR Professional

foundation-toning-brush-w0611-laser-synthetic

€25,00 EUR

~~€25,00 EUR~~ €25,00 EUR

OXXO

Navrženo pro smíchání v úzkých zónách a přesnou korekční práci

Většina štětců na korektor je navržená pro okolí očí nebo plný obličej, takže se jeví nepraktickými v malých zónách, kde je korekce nejdůležitější. Model W0639 je úmyslně zmenšený, takže se může zapadat do záhybu oka, přilepit se k vnitřnímu rohu oka a nasadit se do křivky křídel nosu bez přesahu. Geometrie válce poskytuje rovnoměrný tlak kontaktu kolem obvodu štětcových vláken, takže štětec smíchá rovnoměrně z jakéhokoli úhlu, místo aby přenášel produkt pomocí čela. Hladká povrch vláken Taklonu přenášejí krémové textury bez chytání nebo vytváření skvrn, což činí tento štětec účinným pro jemnou, vrstevnatou práci, kterou vyžaduje korekční makeup.

Premiové materiály, které vydrží 8–10 let

Rukojeťe štětců CTR jsou vyrobeny z premiových tvrdých dřev – především z vybraného afrického jasenu a kanadského olšového – které procházejí 20letým stárnutím a stabilizačním procesem. Toto prodloužené stárnutí odstraní veškerý zbytkový vlhkost z dřeva, takže je zcela odolné vůči vlhkosti, deformaci a smrštění i při denních salonních podmínkách. Ergonomická rovnováha hmotnosti snižuje únavu rukou během vícehodinových sezení. V kombinaci s bronzovými hřídelmi japonské kvality a systémem Triple-Lock pro vláken, jsou ruceje štětců CTR navrženy tak, aby vydržely 8–10 let profesionálního denního použití.

Systém Triple-Lock – Žádné padání vláken

Profesionální štětce CTR nepadají vlákna během aktivního aplikace makeupu nebo pravidelného čištění. Zadržení vláken se dosahuje pomocí systému Triple-Lock: (1) polymerního lepidla kaskádového typu, které trvale spojí každé jednotlivé vlákno; (2) silikonové vrstvy polštáře, která absorbuje tlak a zabraňuje zlomení vláken na základně; (3) japonské bronzové hřídele mechanicky zmáčknuté s precizností zlatníků. Stejně jako nový čichový svetr, může jakýkoli nový štětec s přírodními vlákny uvolnit 2–5 vláken během prvních 1–2 použití – krátkých vláken, která se během ručního sestavení nedostala k lepidlové základně. Po prvním správném praní se to trvale zastaví.

Technika ručního sestavení bez řezání

Všechny profesionální štětce CTR jsou výhradně ručně sestaveny – řemeslníci vybírají vlákna jednotlivě a položují je do precizních forem vlákno po vlákně, přičemž zachovávají nedotčený přírodní špičku každého jediného vlákna. Štětcová vlákna naříznená strojem (používaná v hromadně vyráběných štětcích) odříznou nejjemnější, měkčí špičku každého vlákna, což zanechá tvrdé konce, které poškrábají kůži a nanesou makeup v skvrnách. Přírodní špičky ručně sestavených štětců CTR jsou desítkrát jemnější než lidské vlákno – což dodává těmto štětcům jejich legendarni měkčnost čichu a schopnost smíchat makeup do dokonalého, bezproblémového výsledku.

OXXO

Makeup artists and beauty enthusiasts who need precise cream product application in hard-to-reach areas like inner eye corners nose wings and crease folds.

OXXO

Často kladené otázky

How is the W0639 different from the W0637 barrel brush?

The W0639 is the smaller of the two barrels, built for tight zones like the crease, inner eye corner, and nose wings. The W0637 is medium-sized for broader cream shadow blending across the lid.

Can I use this brush for under-eye concealer?

Yes, although for full under-eye coverage the larger W0637 or the candle-shaped W0645 will cover the area faster. The W0639 shines in spot work and concealer refinement near the tear duct.

Will cream product damage the taklon over time?

No, taklon is designed for cream and oil textures. Regular cleaning with a mild brush soap preserves its softness and shape indefinitely.

Is it suitable for colour-correcting work (green, peach, lavender)?

Yes, its scale and softness are ideal for pressing correctors into targeted zones without spreading the colour outside the area being neutralised.

What wood are CTR brush handles made from?

CTR brush handles are crafted from premium hardwoods — primarily select African ash and Canadian alder — that undergo a 20-year aging and stabilization process. This extended aging removes all residual moisture from the wood, making it completely immune to humidity, warping, and shrinkage even under daily salon conditions. After stabilization, each handle is treated in pressure chambers with protective salts and resins, then finished with three layers of adhesion primer and a UV-polymerized lacquer that resists alcohol, acetone, and surfactants. The result is a handle that won't crack, peel, or swell from repeated washing or disinfectants. The ergonomic weight balance — deliberately shifted toward the bronze ferrule — reduces hand fatigue during multi-hour sessions. Paired with Japanese-grade bronze ferrules and our Triple-Lock bristle system, CTR handles are engineered to last 8–10 years of professional daily use.

Does the bristle shed?

No. CTR professional brushes do not shed during active makeup application or regular cleaning. Bristle retention is one of our defining quality standards, achieved through the Triple-Lock System: 1. Polymer cascade adhesive — The base of every bristle bundle is immersed in a high-tech elastic adhesive that bonds each individual hair permanently without hardening over time. 2. Silicone cushion layer — A thin silicone layer over the adhesive absorbs pressure and prevents bristle breakage at the base during heavy use. 3. Japanese bronze ferrule crimp — The entire assembly is placed inside a stamped bronze ferrule and mechanically crimped with jeweler's precision. Bronze neither expands from heat nor contracts from cold. Important: Like a new cashmere sweater, any new natural-bristle brush may release 2–5 hairs during the first 1–2 uses. These are "technological excess" — short hairs that didn't reach the adhesive base during hand-assembly. After the first proper wash, this stops permanently.

Are CTR bristles hand-assembled or machine-cut?

All CTR professional brushes are exclusively hand-assembled. We never use machine-cutting to shape bristle bundles — a practice that destroys the professional performance of any brush. The difference is fundamental: Machine-cut bristle (mass-market): Hairs are packed into the ferrule and mechanically trimmed to shape. This cuts off the finest, softest tip of each hair — the natural "peak." The result: stiff, scratchy stumps that irritate skin, damage the epidermis, and deposit makeup in blotches. CTR hand-assembled bristle (luxury standard): Artisans select hairs individually and lay them into precision molds hair by hair, preserving the untouched natural tip of every single fiber. The natural tip of CTR's squirrel or goat hair is dozens of times finer than a human hair. These preserved tips give CTR brushes their legendary cashmere softness and their ability to blend makeup into a flawless, seamless finish.

How should I care for my CTR brushes?

CTR high-end brush care falls into two categories: express cleaning between clients and deep washing. Express cleaning (daily): • For natural bristle (squirrel, goat): Use alcohol-free or low-alcohol brush wipes. Gently swipe the bristle across a textured cloth; dry time is 2–3 minutes. • For synthetic bristle (taklon, nylon): Alcohol-based express cleaners are safe and effective. • Critical rule: Never use medical-grade alcohol antiseptic on natural bristle — it instantly dries out the hair cuticle, making it brittle and stiff. Deep washing (every 1–2 weeks): • Natural bristle: Use gentle bar soap, professional brush shampoo, or sulfate-free shampoo. Once a month, apply a drop of regular hair conditioner for 1 minute after washing and rinse — this restores silkiness to squirrel and goat hair. • Synthetic bristle: Can tolerate stronger cleansers. Drying — the golden rule: Always dry brushes flat or bristle-side down, never upright in a cup. Water draining into the ferrule can soften even the strongest adhesive over time. Dry at room temperature — no radiators or hair dryers.

What is the proper technique for washing brushes?

Washing premium brushes correctly is a careful process — the wrong temperature or drying position can permanently damage bristle structure. Step-by-step Golden Standard: 1. Choose the right cleanser. Gentle soap or sulfate-free shampoo for natural bristle (squirrel, goat). For dense synthetic brushes used with cream products, pre-treat with a drop of cleansing oil to break down pigment, then follow with soap. 2. Always point bristle downward. Run cool or barely lukewarm water — hot water breaks down the adhesive. Hold the brush bristle-down at all times; water must not enter the metal ferrule. 3. Gentle circular lathering. Work the bristle in soft circular strokes on your palm or a silicone mat. Never press hard, squeeze the bundle into a fist, or scrub in random directions — this breaks hairs at the base and damages CTR's internal silicone cushion layer. 4. Rinse until clear. Hold bristle down and rinse under running water until completely clear. 5. Reshape the bristle. Blot gently with a soft towel, squeezing from base to tip. Never wring. Reshape the bundle by hand. 6. Dry flat. Lay brushes on a dry towel with bristle slightly overhanging the table edge. Never dry vertically bristle-up, and never near a radiator or hairdryer.

Why does the bristle shine?

The shine on CTR bristle signals premium quality — but its origin differs between natural and synthetic bristle. Natural bristle shine (squirrel, goat, sable): Shine is caused by high melanin content in the hair's cortex layer combined with an intact, undamaged cuticle. When the cuticle is healthy and lies flat — not stripped by harsh chemicals — it acts like a mirror, creating a deep, silky, living luster. CTR uses exclusively organic processing methods; aggressive acid dyeing or bleaching would destroy melanin and leave bristle porous, dull, and brittle. The shine you see is proof that the hair structure is fully preserved. Taklon shine: Taklon is a polyester fiber with a perfectly smooth surface that reflects light uniformly. CTR uses the latest generation of ultra-fine taklon, which produces a delicate, high-end glow — completely different from the cheap, plastic-looking shine of low-grade nylon found in mass-market brushes.

Is it normal for a few hairs to fall out during the first wash?

Yes — losing 2–5 hairs during the very first wash is completely normal with any natural-bristle brush. During hand-assembly, artisans build the bristle bundle hair by hair. Occasionally a very short hair near the bundle's center doesn't quite reach the adhesive base — it simply sits loose inside the "cap" of the brush. The first wash flushes these out. This is not a defect. It stops completely after the first wash. A defect would be: continued shedding on the 2nd, 3rd, and subsequent washes, or a visibly thinning bundle. This indicates poor-quality adhesive, insufficient ferrule crimp, or cut bristle — none of which apply to CTR brushes. CTR's quality controls eliminate defective shedding through three layers: Japanese bronze ferrule stamping with deep mechanical crimp; hand-selection of raw material (short or damaged hairs removed before bundle assembly); and 30-year-aged wood handles that never shrink or loosen the ferrule clamp. For the first wash: bristle pointing down, gentle circular motion on palm, horizontal drying at room temperature.

Are CTR brushes densely packed or soft and airy?

CTR brushes are available in all three density categories — density is a calculated technical parameter matched to specific makeup tasks. Soft, airy (veil density) Best for: loose powder, delicate highlights, dry blush, final shadow blending. Materials: Persian/Caucasian squirrel, long torch-shaped goat. The bundle springs and flexes easily, depositing product in a weightless, transparent layer. Medium, springy (standard density) Best for: pressed eyeshadow, crease definition, gradient blending, dry contour. Materials: Elite goat bristle in Colorful Dream and Black Style collections. Firm pigment pickup from cuticle scales, yet the hand-assembled tip remains soft and precise. Dense, monolithic (high-density) Best for: foundation, concealer, cream contour, lipstick, gel liner. Materials: High-tech taklon and nylon in Dark Sharm and Black Style collections. The dense, non-porous synthetic bundle polishes cream products into the skin for a "second skin" finish. All densities feature bronze ferrule and treated hardwood construction for equal durability.

Will CTR brushes scratch the delicate skin around the eyes?

No. CTR brushes are built around two principles that ensure complete safety for the most sensitive eye area skin. Why most brushes scratch: Machine-cut bristle creates blunt "stumps" that act like tiny razors against the thin, fat-free skin of the eyelid, causing micro-inflammation, contact dermatitis, and accelerated fine lines. How CTR solves this: 1. No-Cut Technology (hand-assembly only) — Every CTR eye brush is assembled entirely by hand, hair by hair, with the natural fine tip ("peak") of each fiber preserved and pointing outward. The skin only ever contacts a silk-soft natural ending, never a cut stump. 2. Strict micron selection — CTR uses only the finest-grade raw materials: goat chest hair from young kids (14.5–20.59 µm) and hollow Persian/Caucasian squirrel. Both are dramatically finer than the average human hair (~70–100 µm). 3. Spring control — Proper bristle length and elasticity allow the brush to adapt to the eye's contours without digging in. For veil-soft application on sensitive skin: White Pearl collection (squirrel). For efficient pigment placement without irritation: Colorful Dream or Black Style (elite goat, hand-assembled).

Can CTR brush bristle cause allergies?

CTR brushes do not cause allergies. Here is why. 90% of "allergic reactions" attributed to brush bristle are actually two separate issues: 1. Mechanical irritation (not allergy): Machine-cut bristle stumps physically scratch and inflame skin, causing redness, flaking, and contact dermatitis. This is not an immune response to animal hair — it is a skin injury from sharp bristle ends. 2. Chemical reaction: Poor-quality dyes or preservatives on cheaply processed raw materials trigger true allergic responses. CTR standards eliminate both causes: • All natural bristle (goat, squirrel, fox, sable, Italian raccoon, black/grey/burgundy squirrel) undergoes multi-stage deep cleaning, degreasing, and sterilization before hand-assembly. All organic compounds and microorganisms are removed while preserving natural softness. • No-Cut hand-assembly means zero stiff stumps and zero mechanical skin injury. For confirmed allergy sufferers: CTR's Black Style and Dark Sharm collections feature taklon and nylon bristle. Nylon has a perfectly smooth, non-porous surface — completely hypoallergenic. Taklon mimics natural squirrel softness but is 100% synthetic and inert. Wood handles are treated with antiseptics in pressure chambers, preventing bacterial growth even under intensive daily cleaning.

Does shiny bristle mean it's natural hair or synthetic taklon?

Shine is not a reliable indicator of natural vs. synthetic — both can shine, for completely different reasons. Natural bristle that shines: The shine comes from high melanin content in the cortex (the hair's core) combined with a healthy, undamaged cuticle acting as a mirror. This is a premium quality marker. Examples of naturally shiny CTR bristle: black/grey squirrel (antracite mirror shine), sable and kolinsky (warm golden-brown luster), elite white goat (silky pearl sheen). If a natural brush looks dull and flat, it means the hair was processed with harsh bleaches or acid dyes that destroyed the melanin. Taklon that shines: Taklon's perfectly smooth polymer surface reflects light uniformly. CTR uses the latest-generation ultra-fine taklon, which produces a delicate, premium-looking glow — not the cheap "plastic" shine of low-grade mass-market nylon. How to tell them apart under magnification: Natural bristle has a scale structure on the surface (cuticle); taklon is mirror-smooth with no texture.

How soft is CTR bristle? (3-level classification)

CTR bristle softness is controlled by two fundamental factors: fiber thickness in microns (human hair ≈ 70–100 µm; CTR raw materials = 14.5–20.59 µm) and No-Cut hand-assembly (preserved natural tips — not machine-cut stumps). Level 1 — Extreme (weightless) softness Materials: black and grey squirrel, fox hair. Feel: like touching silk or liquid velvet. Zero stiffness. Ideal for transparent dry shadow layers, sheer highlights, and hypersensitive or mature skin. Level 2 — Silky softness with noble spring Materials: burgundy squirrel, royal sable, elite white goat (14.5–20.59 µm), premium taklon (Black Style collection). Feel: incredibly soft to the touch with enough snap for controlled color placement and blending. The sweet spot for most professional makeup work. Level 3 — Springy (functional) softness Materials: Italian raccoon, high-tech nylon (Dark Sharm collection). Feel: doesn't scratch, but firm enough for cream textures, gel liners, and graphic precision work.

What is the CTR torch-shaped brush best used for?

The torch shape (tapered bundle — wide at base, narrowing to a pointed tip) is the most versatile shape in professional makeup. It performs two opposite functions at once: • The tip (peak): Applies pigment precisely and pointedly — ideal for placing color deep in the crease, detailing, or accent work. • The sides ("cheeks"): Spread and diffuse pigment softly when pressure increases — creating instant, smooth transitions. Large torch (face): Powder, blush, contour, highlight. The tapered shape follows facial bone structure naturally. The tip allows precise placement (under eye, nose wings, cupid's bow highlight); the sides diffuse it instantly. Small torch (eyes): Crease work and smoky eye. The tip places color deep in the crease; the sides immediately fade it upward. Perfect for lower lash line diffusion. By bristle type: • Squirrel: weightless veil finish, zero risk of overloading • Elite goat: saturated, fast commercial blending (Colorful Dream, Black Style) • Sable: graphic precision with a torch tip • Taklon: hypoallergenic alternative for sensitive skin

Does the paint peel off CTR brush handles after using cleansers?

No. CTR handle lacquer is specifically engineered to resist the daily chemical exposure of professional salon use. Three-layer protection system: 1. Wood stabilization — Before any paint is applied, handles undergo deep drying and pressure-chamber treatment that removes every trace of residual moisture from wood pores. Unstabilized wood micro-expands and contracts under solvents, cracking lacquer from within. CTR's stabilized wood is geometrically static. 2. Triple adhesion primer — Three sequential layers of isolation primer are applied before any color, sealing wood pores completely and creating maximum bond between wood molecules and the decorative paint layer. 3. UV-polymerized lacquer (UV-coating) — The final protective layer is a specialized polymer compound cured under high-intensity UV lamps. UV polymerization creates a monolithic, chemically inert glaze that does not dissolve in ethanol, isopropyl alcohol, acetone, or surfactants. The ferrule-to-handle joint — the most vulnerable point — is sealed with chemical-resistant adhesive inside a deep-crimped bronze ferrule, preventing any solvent from penetrating underneath. Care tip: Dip bristle only (not the handle) into cleanser. Wipe the handle with a microfiber cloth after each client.