Præcisions concealer-børste til under øjne, pletter og detaljekorrektion

€21,00 EUR

~~€25,00 EUR~~ €21,00 EUR

16% rabat Udsolgt

Inklusive skatter.

På lager

Gratis fragt på ordrer over €49,00
30-dages returnering
Gratis prøver

Anbefalede produkter

Præcisions makeup-svamp – Fejlfri foundation- og concealer-blanding

€10,00 EUR

~~€14,00 EUR~~ €10,00 EUR

Professionel teint-børste til flydende, creme og pudder makeup

€25,00 EUR

~~€28,00 EUR~~ €25,00 EUR

Description

Designet til målrettet camouflering og finpudsning af små zoner

Den tilspidsede lyseform smalner til en spids, der når hjørnerne af øjnene, næseborsfolder og cupidbue — områder, hvor standard flade børster kæmper. Bredden på 25 mm ved basen giver nok overflade til hurtig blending på tværs af under-øje-områder, mens den spidse ende håndterer camouflering af hudpletter med præcision. Med en længde på 181 mm placerer håndtaget din hånd tæt nok på til kontrollerede stippelbevægelser under detaljeret korrektionsarbejde.

Premium-materialer, der holder 8-10 år

CTR-børstehåndtag er fremstillet af premium hårdttræ — primært udvalgt afrikansk ask og canadisk el — som gennemgår en 20-årig aldrings- og stabiliseringsproces. Denne udvidede aldring fjerner al resterende fugt fra træet, hvilket gør det fuldstændigt immunt over for fugtighed, skævhed og krympning selv under daglige salonforhold. Den ergonomiske vægtbalance reducerer træthed i hånden under sessioner på flere timer. Sammen med japanske bronze-ferruler og Triple-Lock børstesystemet er CTR-håndtagene konstrueret til at holde 8-10 år med professionel daglig brug.

Triple-Lock System — Nul afgivelse af børstehår

CTR professionelle børster afgiver ikke hår under aktiv makeup-påføring eller regelmæssig rengøring. Fastholdelse af børstehår opnås gennem Triple-Lock System: (1) polymer kaskade-klæbestof, der binder hvert enkelt hår permanent; (2) et silikonepudelag, der absorberer tryk og forhindrer brud på børstehår ved basen; (3) en japansk bronze-ferrule mekanisk kramset med juveler-præcision. Ligesom en ny kashmirsweater kan enhver ny naturlig børste frigive 2-5 hår under de første 1-2 gange den bruges — korte hår, der ikke helt nåede klæbebasen under hånd-samling. Efter den første ordentlige vask stopper dette permanent.

Håndsamlet No-Cut teknologi

Alle CTR professionelle børster er udelukkende håndsamlede — håndværkere udvælger hår individuelt og lægger dem i præcisionsforme hår for hår, hvilket bevarer den urørte naturlige spids af hver eneste fiber. Maskinskåret børstehår (brugt i masseproducerede børster) skærer det fineste, blødeste spids af hvert hår af, hvilket efterlader stive stubbe, der ridser huden og aflejrer makeup i pletter. CTRs håndsamlede naturlige spidser er dusinvis af gange finere end et menneskehår — hvilket giver disse børster deres legendariske kashmir-blødhed og evne til at blande makeup til en fejlfri, sømløs finish.

Hvad er der i boksen

1 x Foundation & Dry Texture Brush - Synthetic Taklon

Hvem er dette sæt til?

Professional makeup artists and beauty enthusiasts who need precision foundation tools for targeting inner corners and small facial zones.

Højdepunkter

🎯 Precision Application · 💧 Works with Cream & Liquid · ✨ Buildable Coverage · 💚 Hypoallergenic · 💜 Ultra-Soft Synthetic · 👩‍🎨 Professional Grade

Hvad det er

A precision concealer brush shaped like a tapered candle, crafted from high-grade taklon fibres for cream contour and liquid foundation application.

Hvad det gør

The densely packed bristles replicate the ultra-soft texture of premium natural hair, delivering targeted application with full control. This makeup brush for liquid foundation is built for detailed work — smoothing over redness, camouflaging post-acne marks, sculpting with cream contour products, and applying cream blush and highlighter. The unique shape deposits product exactly where you need it for seamless blending and buildable coverage.

Foreslået brug

For under eye concealer, dab product onto areas of concern and blend outwards using short, stippling motions. For cream contour, apply to desired areas and blend edges with the tapered tip. Press gently onto high points for highlighter application.

Detaljer

Material: Taklon | Brush Length: 181mm | Bristle Height: 36mm | Bristle Width: 25mm | Handle: Seasoned wood

Se alle detaljer

Frequently Asked Questions

What's the difference between stippling and buffing?

Stippling uses vertical dabbing to deposit product precisely. Buffing uses circular motions for seamless blending.

Suitable for cream contour under foundation?

Yes, the tapered shape allows precise placement, synthetic fibers blend cream without streaking.

Good for beginners?

Yes, the tapered tip provides natural guidance for placement.

How does this compare to a beauty sponge?

Brushes offer more precision and waste less product.

What wood are CTR brush handles made from?

CTR brush handles are crafted from premium hardwoods — primarily select African ash and Canadian alder — that undergo a 20-year aging and stabilization process. This extended aging removes all residual moisture from the wood, making it completely immune to humidity, warping, and shrinkage even under daily salon conditions. After stabilization, each handle is treated in pressure chambers with protective salts and resins, then finished with three layers of adhesion primer and a UV-polymerized lacquer that resists alcohol, acetone, and surfactants. The result is a handle that won't crack, peel, or swell from repeated washing or disinfectants. The ergonomic weight balance — deliberately shifted toward the bronze ferrule — reduces hand fatigue during multi-hour sessions. Paired with Japanese-grade bronze ferrules and our Triple-Lock bristle system, CTR handles are engineered to last 8–10 years of professional daily use.

Does the bristle shed?

No. CTR professional brushes do not shed during active makeup application or regular cleaning. Bristle retention is one of our defining quality standards, achieved through the Triple-Lock System: 1. Polymer cascade adhesive — The base of every bristle bundle is immersed in a high-tech elastic adhesive that bonds each individual hair permanently without hardening over time. 2. Silicone cushion layer — A thin silicone layer over the adhesive absorbs pressure and prevents bristle breakage at the base during heavy use. 3. Japanese bronze ferrule crimp — The entire assembly is placed inside a stamped bronze ferrule and mechanically crimped with jeweler's precision. Bronze neither expands from heat nor contracts from cold. Important: Like a new cashmere sweater, any new natural-bristle brush may release 2–5 hairs during the first 1–2 uses. These are "technological excess" — short hairs that didn't reach the adhesive base during hand-assembly. After the first proper wash, this stops permanently.

Are CTR bristles hand-assembled or machine-cut?

All CTR professional brushes are exclusively hand-assembled. We never use machine-cutting to shape bristle bundles — a practice that destroys the professional performance of any brush. The difference is fundamental: Machine-cut bristle (mass-market): Hairs are packed into the ferrule and mechanically trimmed to shape. This cuts off the finest, softest tip of each hair — the natural "peak." The result: stiff, scratchy stumps that irritate skin, damage the epidermis, and deposit makeup in blotches. CTR hand-assembled bristle (luxury standard): Artisans select hairs individually and lay them into precision molds hair by hair, preserving the untouched natural tip of every single fiber. The natural tip of CTR's squirrel or goat hair is dozens of times finer than a human hair. These preserved tips give CTR brushes their legendary cashmere softness and their ability to blend makeup into a flawless, seamless finish.

How should I care for my CTR brushes?

CTR high-end brush care falls into two categories: express cleaning between clients and deep washing. Express cleaning (daily): • For natural bristle (squirrel, goat): Use alcohol-free or low-alcohol brush wipes. Gently swipe the bristle across a textured cloth; dry time is 2–3 minutes. • For synthetic bristle (taklon, nylon): Alcohol-based express cleaners are safe and effective. • Critical rule: Never use medical-grade alcohol antiseptic on natural bristle — it instantly dries out the hair cuticle, making it brittle and stiff. Deep washing (every 1–2 weeks): • Natural bristle: Use gentle bar soap, professional brush shampoo, or sulfate-free shampoo. Once a month, apply a drop of regular hair conditioner for 1 minute after washing and rinse — this restores silkiness to squirrel and goat hair. • Synthetic bristle: Can tolerate stronger cleansers. Drying — the golden rule: Always dry brushes flat or bristle-side down, never upright in a cup. Water draining into the ferrule can soften even the strongest adhesive over time. Dry at room temperature — no radiators or hair dryers.

What is the proper technique for washing brushes?

Washing premium brushes correctly is a careful process — the wrong temperature or drying position can permanently damage bristle structure. Step-by-step Golden Standard: 1. Choose the right cleanser. Gentle soap or sulfate-free shampoo for natural bristle (squirrel, goat). For dense synthetic brushes used with cream products, pre-treat with a drop of cleansing oil to break down pigment, then follow with soap. 2. Always point bristle downward. Run cool or barely lukewarm water — hot water breaks down the adhesive. Hold the brush bristle-down at all times; water must not enter the metal ferrule. 3. Gentle circular lathering. Work the bristle in soft circular strokes on your palm or a silicone mat. Never press hard, squeeze the bundle into a fist, or scrub in random directions — this breaks hairs at the base and damages CTR's internal silicone cushion layer. 4. Rinse until clear. Hold bristle down and rinse under running water until completely clear. 5. Reshape the bristle. Blot gently with a soft towel, squeezing from base to tip. Never wring. Reshape the bundle by hand. 6. Dry flat. Lay brushes on a dry towel with bristle slightly overhanging the table edge. Never dry vertically bristle-up, and never near a radiator or hairdryer.

Why does the bristle shine?

The shine on CTR bristle signals premium quality — but its origin differs between natural and synthetic bristle. Natural bristle shine (squirrel, goat, sable): Shine is caused by high melanin content in the hair's cortex layer combined with an intact, undamaged cuticle. When the cuticle is healthy and lies flat — not stripped by harsh chemicals — it acts like a mirror, creating a deep, silky, living luster. CTR uses exclusively organic processing methods; aggressive acid dyeing or bleaching would destroy melanin and leave bristle porous, dull, and brittle. The shine you see is proof that the hair structure is fully preserved. Taklon shine: Taklon is a polyester fiber with a perfectly smooth surface that reflects light uniformly. CTR uses the latest generation of ultra-fine taklon, which produces a delicate, high-end glow — completely different from the cheap, plastic-looking shine of low-grade nylon found in mass-market brushes.

Is it normal for a few hairs to fall out during the first wash?

Yes — losing 2–5 hairs during the very first wash is completely normal with any natural-bristle brush. During hand-assembly, artisans build the bristle bundle hair by hair. Occasionally a very short hair near the bundle's center doesn't quite reach the adhesive base — it simply sits loose inside the "cap" of the brush. The first wash flushes these out. This is not a defect. It stops completely after the first wash. A defect would be: continued shedding on the 2nd, 3rd, and subsequent washes, or a visibly thinning bundle. This indicates poor-quality adhesive, insufficient ferrule crimp, or cut bristle — none of which apply to CTR brushes. CTR's quality controls eliminate defective shedding through three layers: Japanese bronze ferrule stamping with deep mechanical crimp; hand-selection of raw material (short or damaged hairs removed before bundle assembly); and 30-year-aged wood handles that never shrink or loosen the ferrule clamp. For the first wash: bristle pointing down, gentle circular motion on palm, horizontal drying at room temperature.

Are CTR brushes densely packed or soft and airy?

CTR brushes are available in all three density categories — density is a calculated technical parameter matched to specific makeup tasks. Soft, airy (veil density) Best for: loose powder, delicate highlights, dry blush, final shadow blending. Materials: Persian/Caucasian squirrel, long torch-shaped goat. The bundle springs and flexes easily, depositing product in a weightless, transparent layer. Medium, springy (standard density) Best for: pressed eyeshadow, crease definition, gradient blending, dry contour. Materials: Elite goat bristle in Colorful Dream and Black Style collections. Firm pigment pickup from cuticle scales, yet the hand-assembled tip remains soft and precise. Dense, monolithic (high-density) Best for: foundation, concealer, cream contour, lipstick, gel liner. Materials: High-tech taklon and nylon in Dark Sharm and Black Style collections. The dense, non-porous synthetic bundle polishes cream products into the skin for a "second skin" finish. All densities feature bronze ferrule and treated hardwood construction for equal durability.

Can CTR brush bristle cause allergies?

CTR brushes do not cause allergies. Here is why. 90% of "allergic reactions" attributed to brush bristle are actually two separate issues: 1. Mechanical irritation (not allergy): Machine-cut bristle stumps physically scratch and inflame skin, causing redness, flaking, and contact dermatitis. This is not an immune response to animal hair — it is a skin injury from sharp bristle ends. 2. Chemical reaction: Poor-quality dyes or preservatives on cheaply processed raw materials trigger true allergic responses. CTR standards eliminate both causes: • All natural bristle (goat, squirrel, fox, sable, Italian raccoon, black/grey/burgundy squirrel) undergoes multi-stage deep cleaning, degreasing, and sterilization before hand-assembly. All organic compounds and microorganisms are removed while preserving natural softness. • No-Cut hand-assembly means zero stiff stumps and zero mechanical skin injury. For confirmed allergy sufferers: CTR's Black Style and Dark Sharm collections feature taklon and nylon bristle. Nylon has a perfectly smooth, non-porous surface — completely hypoallergenic. Taklon mimics natural squirrel softness but is 100% synthetic and inert. Wood handles are treated with antiseptics in pressure chambers, preventing bacterial growth even under intensive daily cleaning.

Does shiny bristle mean it's natural hair or synthetic taklon?

Shine is not a reliable indicator of natural vs. synthetic — both can shine, for completely different reasons. Natural bristle that shines: The shine comes from high melanin content in the cortex (the hair's core) combined with a healthy, undamaged cuticle acting as a mirror. This is a premium quality marker. Examples of naturally shiny CTR bristle: black/grey squirrel (antracite mirror shine), sable and kolinsky (warm golden-brown luster), elite white goat (silky pearl sheen). If a natural brush looks dull and flat, it means the hair was processed with harsh bleaches or acid dyes that destroyed the melanin. Taklon that shines: Taklon's perfectly smooth polymer surface reflects light uniformly. CTR uses the latest-generation ultra-fine taklon, which produces a delicate, premium-looking glow — not the cheap "plastic" shine of low-grade mass-market nylon. How to tell them apart under magnification: Natural bristle has a scale structure on the surface (cuticle); taklon is mirror-smooth with no texture.

How soft is CTR bristle? (3-level classification)

CTR bristle softness is controlled by two fundamental factors: fiber thickness in microns (human hair ≈ 70–100 µm; CTR raw materials = 14.5–20.59 µm) and No-Cut hand-assembly (preserved natural tips — not machine-cut stumps). Level 1 — Extreme (weightless) softness Materials: black and grey squirrel, fox hair. Feel: like touching silk or liquid velvet. Zero stiffness. Ideal for transparent dry shadow layers, sheer highlights, and hypersensitive or mature skin. Level 2 — Silky softness with noble spring Materials: burgundy squirrel, royal sable, elite white goat (14.5–20.59 µm), premium taklon (Black Style collection). Feel: incredibly soft to the touch with enough snap for controlled color placement and blending. The sweet spot for most professional makeup work. Level 3 — Springy (functional) softness Materials: Italian raccoon, high-tech nylon (Dark Sharm collection). Feel: doesn't scratch, but firm enough for cream textures, gel liners, and graphic precision work.

Does the CTR foundation brush pack product densely?

Yes. CTR foundation brushes are engineered for maximum product transfer with zero waste. Dense packing means product reaches skin rather than being absorbed into bristle. CTR achieves this through: 1. High-Density hand-assembly — thousands of fibers are laid individually by artisans, creating a monolithic, void-free bundle that acts as a single elastic pad. 2. Non-porous taklon/nylon bristle — smooth synthetic fibers don't absorb product internally. 100% of the product placed on the bristle is transferred to skin. Result: 2–3x less product wasted compared to a sponge or porous natural-hair brush. 3. No-Cut natural tips — despite maximum density, CTR bristle tips are silk-soft. No rough cut stumps that would push product sideways and create streaks. What dense packing delivers: • Polishing effect: bristle doesn't flex sideways; it polishes cream into pores and fine lines, creating a "second skin" finish. • Variable coverage: spreading strokes = medium buildable layer; tapping/stippling = full coverage. CTR foundation brushes with high-density packing: W0596, W0611, W0644.

Does the CTR foundation brush leave streaks?

No. Streaks are caused by machine-cut bristle that rakes and drags product unevenly. CTR eliminates streaks through three factors: 1. No-Cut technology — Every hair's natural tip is preserved. Silk-soft endings glide across skin and stretch product into a microscopically thin, even layer — not a harsh track. 2. High-Density uniform packing — The dense bundle doesn't flex sideways mid-stroke. Every bristle maintains equal pressure and deposits an unbroken, uniform layer. 3. Non-porous synthetic bristle (taklon/nylon) — Doesn't absorb product mid-application; never clumps or creates dry spots. For round buffers/kabuki shapes: Circular polishing motions distribute product seamlessly, filling every pore for an airbrushed finish. Bronze ferrules lock bundle geometry permanently; 30-year-aged wood handles never loosen the ferrule clamp. CTR no-streak foundation brushes: W0596, W0611, W0644, W0710 (correction and tone brush).

Does the paint peel off CTR brush handles after using cleansers?

No. CTR handle lacquer is specifically engineered to resist the daily chemical exposure of professional salon use. Three-layer protection system: 1. Wood stabilization — Before any paint is applied, handles undergo deep drying and pressure-chamber treatment that removes every trace of residual moisture from wood pores. Unstabilized wood micro-expands and contracts under solvents, cracking lacquer from within. CTR's stabilized wood is geometrically static. 2. Triple adhesion primer — Three sequential layers of isolation primer are applied before any color, sealing wood pores completely and creating maximum bond between wood molecules and the decorative paint layer. 3. UV-polymerized lacquer (UV-coating) — The final protective layer is a specialized polymer compound cured under high-intensity UV lamps. UV polymerization creates a monolithic, chemically inert glaze that does not dissolve in ethanol, isopropyl alcohol, acetone, or surfactants. The ferrule-to-handle joint — the most vulnerable point — is sealed with chemical-resistant adhesive inside a deep-crimped bronze ferrule, preventing any solvent from penetrating underneath. Care tip: Dip bristle only (not the handle) into cleanser. Wipe the handle with a microfiber cloth after each client.