Hassas Gizleyici ve Leke Düzeltme Fırçası W0645 – Dark Sharm

€18,00 EUR

~~€18,00 EUR~~ €18,00 EUR

Tükendi

Vergiler dahil.

Stokta

€49,00 üzerindeki siparişlerde ücretsiz kargo
30 Gün İade

Önerilen ürünler

Foundation & Dry Texture Brush W0644 — Taklon Bristles by ENCANTO

Göz Altı, Leke ve Detay Düzeltme İçin Hassas Gizleyici Fırça

€22,00 EUR

~~€22,00 EUR~~ €22,00 EUR

CTR W0611 tam kapaklı fondöten fırçası Siyah Stil, tam görünüm beyaz arka planlı, lazer ile işlenmiş sentetik — CTR Professional

Tam Kapalı Fondöten Fırçası W0611 – Lazer İşlemeli Sentetik

€25,00 EUR

~~€25,00 EUR~~ €25,00 EUR

Açıklama

Hassas Krem Uygulaması ve Esnek Kenar Karıştırma İçin Tasarlanmıştır

Mum silueti kozmetik bir detay değil, işlevsel bir tercihtir: daralan ucu nokta uygulamaları ve ince düzeltmeleri kolaylaştırır, daha dolgun gövde ise ürünü tekrar doldurmak veya aleti değiştirmek zorunda kalmadan kenarları yayarak karıştırır.

Taklon, krem ürünleri için standart sentetik malzemedir çünkü lifleri yeterince pürüzsüzdir, ürünün üzerinde tutunmadan kayar, aynı zamanda yeterince serttir ki pigmenti kontrollü bir şekilde dağıtabilir. Doğal saçların aksine, taklon yağ bazlı formülleri emmez, bu da fırça ve ürünün bütünlüğünü korur. 20 yıllık yaşlandırılmış ahşap sap, imza niteliğinde bir CTR yapı detayıdır; seçilmesinin sebebi yaşlandırılmış ahşap su, temizleyiciler ve salon nemine yıllarca maruz kalsa bile boyutsal kararlılığını korumasıdır.

8–10 Yıl Dayanacak Premium Malzemeler

CTR fırça sapları premium sert ahşaplardan üretilir — öncelikle seçilmiş Afrika kestanesi ve Kanada kızılağacı — bu ağaçlar 20 yıllık yaşlandırma ve stabilizasyon sürecinden geçirilir. Bu uzun süreli yaşlandırma, ahşaptan tüm kalan nemi çıkarır, bu da onu günlük salon koşullarında bile neme, bükülmeye ve büzülmeye tamamen dayanıklı kılar. Ergonomik ağırlık dengesi, saatler süren oturumlar sırasında el yorgunluğunu azaltır. Japon kalite bronz manşetler ve Triple-Lock kirpik sistemi ile birleştirildiğinde, CTR sapları profesyonel günlük kullanımda 8–10 yıl dayanacak şekilde tasarlanmıştır.

Triple-Lock Sistemi — Sıfır Kirpik Dökülmesi

CTR profesyonel fırçaları aktif makyaj uygulaması veya düzenli temizlik sırasında kirpik dökmez. Kirpik tutumu Triple-Lock Sistemi ile sağlanır: (1) her bir sacı kalıcı olarak birleştiren polimer kaskad yapıştırıcı; (2) basıncı emen ve tabandaki kirpik kırılmasını önleyen silikon yastık katmanı; (3) zanaatkar hassasiyeti ile mekanik olarak bükülmüş Japon bronz manşet. Yeni bir keçi yeleği gibi, her yeni doğal kirpikli fırça ilk 1-2 kullanımda 2-5 saç dökebilir — bu kısa saçlar elle montaj sırasında yapıştırıcı tabanına ulaşamamışlardır. İlk doğru yıkamadan sonra bu durum kalıcı olarak sonlanır.

Elle Montajlı Kesiksiz Teknoloji

Tüm CTR profesyonel fırçaları özel olarak elle montaj edilir — ustalar saçları tek tek seçer ve her birini hassas kalıplara yerleştirir, her bir lifin dokunulmamış doğal ucunu korur. Kitle pazarındaki fırçalarda kullanılan makine ile kesilmiş kirpik, her bir sacın en ince, en yumuşak ucunu keser, cildi kaşıyan ve makyajı lekeler halinde bırakan sert kalıntılar bırakır. CTR'nin elle montajlı doğal uçları insan saçından onlarca kat daha incedir — bu fırçalara efsanevi keçi yeleği yumuşaklığını ve makyajı kusursuz, sorunsuz bir şekilde karıştırma yeteneğini verir.

Kutuda ne var?

1 x Concealer and Cream Texture Brush - Taklon Candle Shape

Bu Set Kim İçin?

Makeup artists who need a candle-shaped brush for precise spot concealing and edge diffusing with cream textures.

Öne Çıkanlar

🕯️ Candle-Shaped Head · 💧 Cream & Oil Specialist · 🔄 Soft and Mobile · 🎯 Small-Area Precision · 🌿 20-Year Seasoned Wood · 👩‍🎨 Professional Grade

Ne olduğunu

A soft, highly mobile brush with a distinctive candle shape, crafted from taklon pile for application and blending of cream and oil-based textures across cream blush, highlighter, concealer, and corrector.

Ne Yapar

The W0645 is a soft and highly agile brush for applying and blending cream and oily textures, made in the shape of a candle. The brush is suitable for working with all oily products: cream blush, highlighter, concealer, corrector, and for correction of small facial areas that demand controlled placement. Its handle is crafted from wood that has been aged for 20 years, a seasoning process that removes moisture and internal stress from the timber so it resists warping, cracking, and musty odour build-up through repeated washing. Taklon fibres do not absorb cream product into the bristle core, which means more pigment reaches the skin and less is wasted in cleaning.

Önerilen Kullanım

Pick up cream product on the candle tip and press onto target areas. For concealer, dab over blemishes or under-eye shadows, then roll the brush head to blend edges seamlessly. For cream blush, work the tip across the apples of the cheeks and soften outward. The candle shape allows you to switch between precision placement (tip) and softer diffusion (sides) in one motion.

Ayrıntılar

Tüm ayrıntıları görüntüle

Sıkça Sorulan Sorular

Why is taklon the standard fibre for cream textures?

Taklon is a smooth synthetic that does not absorb oil-based product into its core, so cream, liquid, and gel formulas release cleanly onto the skin. Natural hair absorbs oils, which wastes product and shortens brush life.

What does the candle shape enable that a round brush cannot?

The tapered tip places product with pinpoint accuracy, while the wider body blends edges in the same stroke. A fully round brush cannot offer both precision placement and diffused blending without repositioning.

How is 20-year seasoned wood different from standard wood handles?

Long seasoning removes residual moisture and internal tension from the timber, leaving a handle that resists warping, cracking, and the musty odour that can develop in humid environments. It also holds its finish through years of repeated washing.

Can I use this brush for powder products as well?

It is optimised for creams and oils. For powder concealer or setting work, a fluffier brush with natural or hybrid bristles will perform better.

What wood are CTR brush handles made from?

CTR brush handles are crafted from premium hardwoods — primarily select African ash and Canadian alder — that undergo a 20-year aging and stabilization process. This extended aging removes all residual moisture from the wood, making it completely immune to humidity, warping, and shrinkage even under daily salon conditions. After stabilization, each handle is treated in pressure chambers with protective salts and resins, then finished with three layers of adhesion primer and a UV-polymerized lacquer that resists alcohol, acetone, and surfactants. The result is a handle that won't crack, peel, or swell from repeated washing or disinfectants. The ergonomic weight balance — deliberately shifted toward the bronze ferrule — reduces hand fatigue during multi-hour sessions. Paired with Japanese-grade bronze ferrules and our Triple-Lock bristle system, CTR handles are engineered to last 8–10 years of professional daily use.

Does the bristle shed?

No. CTR professional brushes do not shed during active makeup application or regular cleaning. Bristle retention is one of our defining quality standards, achieved through the Triple-Lock System: 1. Polymer cascade adhesive — The base of every bristle bundle is immersed in a high-tech elastic adhesive that bonds each individual hair permanently without hardening over time. 2. Silicone cushion layer — A thin silicone layer over the adhesive absorbs pressure and prevents bristle breakage at the base during heavy use. 3. Japanese bronze ferrule crimp — The entire assembly is placed inside a stamped bronze ferrule and mechanically crimped with jeweler's precision. Bronze neither expands from heat nor contracts from cold. Important: Like a new cashmere sweater, any new natural-bristle brush may release 2–5 hairs during the first 1–2 uses. These are "technological excess" — short hairs that didn't reach the adhesive base during hand-assembly. After the first proper wash, this stops permanently.

Are CTR bristles hand-assembled or machine-cut?

All CTR professional brushes are exclusively hand-assembled. We never use machine-cutting to shape bristle bundles — a practice that destroys the professional performance of any brush. The difference is fundamental: Machine-cut bristle (mass-market): Hairs are packed into the ferrule and mechanically trimmed to shape. This cuts off the finest, softest tip of each hair — the natural "peak." The result: stiff, scratchy stumps that irritate skin, damage the epidermis, and deposit makeup in blotches. CTR hand-assembled bristle (luxury standard): Artisans select hairs individually and lay them into precision molds hair by hair, preserving the untouched natural tip of every single fiber. The natural tip of CTR's squirrel or goat hair is dozens of times finer than a human hair. These preserved tips give CTR brushes their legendary cashmere softness and their ability to blend makeup into a flawless, seamless finish.

How should I care for my CTR brushes?

CTR high-end brush care falls into two categories: express cleaning between clients and deep washing. Express cleaning (daily): • For natural bristle (squirrel, goat): Use alcohol-free or low-alcohol brush wipes. Gently swipe the bristle across a textured cloth; dry time is 2–3 minutes. • For synthetic bristle (taklon, nylon): Alcohol-based express cleaners are safe and effective. • Critical rule: Never use medical-grade alcohol antiseptic on natural bristle — it instantly dries out the hair cuticle, making it brittle and stiff. Deep washing (every 1–2 weeks): • Natural bristle: Use gentle bar soap, professional brush shampoo, or sulfate-free shampoo. Once a month, apply a drop of regular hair conditioner for 1 minute after washing and rinse — this restores silkiness to squirrel and goat hair. • Synthetic bristle: Can tolerate stronger cleansers. Drying — the golden rule: Always dry brushes flat or bristle-side down, never upright in a cup. Water draining into the ferrule can soften even the strongest adhesive over time. Dry at room temperature — no radiators or hair dryers.

What is the proper technique for washing brushes?

Washing premium brushes correctly is a careful process — the wrong temperature or drying position can permanently damage bristle structure. Step-by-step Golden Standard: 1. Choose the right cleanser. Gentle soap or sulfate-free shampoo for natural bristle (squirrel, goat). For dense synthetic brushes used with cream products, pre-treat with a drop of cleansing oil to break down pigment, then follow with soap. 2. Always point bristle downward. Run cool or barely lukewarm water — hot water breaks down the adhesive. Hold the brush bristle-down at all times; water must not enter the metal ferrule. 3. Gentle circular lathering. Work the bristle in soft circular strokes on your palm or a silicone mat. Never press hard, squeeze the bundle into a fist, or scrub in random directions — this breaks hairs at the base and damages CTR's internal silicone cushion layer. 4. Rinse until clear. Hold bristle down and rinse under running water until completely clear. 5. Reshape the bristle. Blot gently with a soft towel, squeezing from base to tip. Never wring. Reshape the bundle by hand. 6. Dry flat. Lay brushes on a dry towel with bristle slightly overhanging the table edge. Never dry vertically bristle-up, and never near a radiator or hairdryer.

Why does the bristle shine?

The shine on CTR bristle signals premium quality — but its origin differs between natural and synthetic bristle. Natural bristle shine (squirrel, goat, sable): Shine is caused by high melanin content in the hair's cortex layer combined with an intact, undamaged cuticle. When the cuticle is healthy and lies flat — not stripped by harsh chemicals — it acts like a mirror, creating a deep, silky, living luster. CTR uses exclusively organic processing methods; aggressive acid dyeing or bleaching would destroy melanin and leave bristle porous, dull, and brittle. The shine you see is proof that the hair structure is fully preserved. Taklon shine: Taklon is a polyester fiber with a perfectly smooth surface that reflects light uniformly. CTR uses the latest generation of ultra-fine taklon, which produces a delicate, high-end glow — completely different from the cheap, plastic-looking shine of low-grade nylon found in mass-market brushes.

Is it normal for a few hairs to fall out during the first wash?

Yes — losing 2–5 hairs during the very first wash is completely normal with any natural-bristle brush. During hand-assembly, artisans build the bristle bundle hair by hair. Occasionally a very short hair near the bundle's center doesn't quite reach the adhesive base — it simply sits loose inside the "cap" of the brush. The first wash flushes these out. This is not a defect. It stops completely after the first wash. A defect would be: continued shedding on the 2nd, 3rd, and subsequent washes, or a visibly thinning bundle. This indicates poor-quality adhesive, insufficient ferrule crimp, or cut bristle — none of which apply to CTR brushes. CTR's quality controls eliminate defective shedding through three layers: Japanese bronze ferrule stamping with deep mechanical crimp; hand-selection of raw material (short or damaged hairs removed before bundle assembly); and 30-year-aged wood handles that never shrink or loosen the ferrule clamp. For the first wash: bristle pointing down, gentle circular motion on palm, horizontal drying at room temperature.

Are CTR brushes densely packed or soft and airy?

CTR brushes are available in all three density categories — density is a calculated technical parameter matched to specific makeup tasks. Soft, airy (veil density) Best for: loose powder, delicate highlights, dry blush, final shadow blending. Materials: Persian/Caucasian squirrel, long torch-shaped goat. The bundle springs and flexes easily, depositing product in a weightless, transparent layer. Medium, springy (standard density) Best for: pressed eyeshadow, crease definition, gradient blending, dry contour. Materials: Elite goat bristle in Colorful Dream and Black Style collections. Firm pigment pickup from cuticle scales, yet the hand-assembled tip remains soft and precise. Dense, monolithic (high-density) Best for: foundation, concealer, cream contour, lipstick, gel liner. Materials: High-tech taklon and nylon in Dark Sharm and Black Style collections. The dense, non-porous synthetic bundle polishes cream products into the skin for a "second skin" finish. All densities feature bronze ferrule and treated hardwood construction for equal durability.

Will CTR brushes scratch the delicate skin around the eyes?

No. CTR brushes are built around two principles that ensure complete safety for the most sensitive eye area skin. Why most brushes scratch: Machine-cut bristle creates blunt "stumps" that act like tiny razors against the thin, fat-free skin of the eyelid, causing micro-inflammation, contact dermatitis, and accelerated fine lines. How CTR solves this: 1. No-Cut Technology (hand-assembly only) — Every CTR eye brush is assembled entirely by hand, hair by hair, with the natural fine tip ("peak") of each fiber preserved and pointing outward. The skin only ever contacts a silk-soft natural ending, never a cut stump. 2. Strict micron selection — CTR uses only the finest-grade raw materials: goat chest hair from young kids (14.5–20.59 µm) and hollow Persian/Caucasian squirrel. Both are dramatically finer than the average human hair (~70–100 µm). 3. Spring control — Proper bristle length and elasticity allow the brush to adapt to the eye's contours without digging in. For veil-soft application on sensitive skin: White Pearl collection (squirrel). For efficient pigment placement without irritation: Colorful Dream or Black Style (elite goat, hand-assembled).

Can CTR brush bristle cause allergies?

CTR brushes do not cause allergies. Here is why. 90% of "allergic reactions" attributed to brush bristle are actually two separate issues: 1. Mechanical irritation (not allergy): Machine-cut bristle stumps physically scratch and inflame skin, causing redness, flaking, and contact dermatitis. This is not an immune response to animal hair — it is a skin injury from sharp bristle ends. 2. Chemical reaction: Poor-quality dyes or preservatives on cheaply processed raw materials trigger true allergic responses. CTR standards eliminate both causes: • All natural bristle (goat, squirrel, fox, sable, Italian raccoon, black/grey/burgundy squirrel) undergoes multi-stage deep cleaning, degreasing, and sterilization before hand-assembly. All organic compounds and microorganisms are removed while preserving natural softness. • No-Cut hand-assembly means zero stiff stumps and zero mechanical skin injury. For confirmed allergy sufferers: CTR's Black Style and Dark Sharm collections feature taklon and nylon bristle. Nylon has a perfectly smooth, non-porous surface — completely hypoallergenic. Taklon mimics natural squirrel softness but is 100% synthetic and inert. Wood handles are treated with antiseptics in pressure chambers, preventing bacterial growth even under intensive daily cleaning.

Does shiny bristle mean it's natural hair or synthetic taklon?

Shine is not a reliable indicator of natural vs. synthetic — both can shine, for completely different reasons. Natural bristle that shines: The shine comes from high melanin content in the cortex (the hair's core) combined with a healthy, undamaged cuticle acting as a mirror. This is a premium quality marker. Examples of naturally shiny CTR bristle: black/grey squirrel (antracite mirror shine), sable and kolinsky (warm golden-brown luster), elite white goat (silky pearl sheen). If a natural brush looks dull and flat, it means the hair was processed with harsh bleaches or acid dyes that destroyed the melanin. Taklon that shines: Taklon's perfectly smooth polymer surface reflects light uniformly. CTR uses the latest-generation ultra-fine taklon, which produces a delicate, premium-looking glow — not the cheap "plastic" shine of low-grade mass-market nylon. How to tell them apart under magnification: Natural bristle has a scale structure on the surface (cuticle); taklon is mirror-smooth with no texture.

How soft is CTR bristle? (3-level classification)

CTR bristle softness is controlled by two fundamental factors: fiber thickness in microns (human hair ≈ 70–100 µm; CTR raw materials = 14.5–20.59 µm) and No-Cut hand-assembly (preserved natural tips — not machine-cut stumps). Level 1 — Extreme (weightless) softness Materials: black and grey squirrel, fox hair. Feel: like touching silk or liquid velvet. Zero stiffness. Ideal for transparent dry shadow layers, sheer highlights, and hypersensitive or mature skin. Level 2 — Silky softness with noble spring Materials: burgundy squirrel, royal sable, elite white goat (14.5–20.59 µm), premium taklon (Black Style collection). Feel: incredibly soft to the touch with enough snap for controlled color placement and blending. The sweet spot for most professional makeup work. Level 3 — Springy (functional) softness Materials: Italian raccoon, high-tech nylon (Dark Sharm collection). Feel: doesn't scratch, but firm enough for cream textures, gel liners, and graphic precision work.

What is the CTR torch-shaped brush best used for?

The torch shape (tapered bundle — wide at base, narrowing to a pointed tip) is the most versatile shape in professional makeup. It performs two opposite functions at once: • The tip (peak): Applies pigment precisely and pointedly — ideal for placing color deep in the crease, detailing, or accent work. • The sides ("cheeks"): Spread and diffuse pigment softly when pressure increases — creating instant, smooth transitions. Large torch (face): Powder, blush, contour, highlight. The tapered shape follows facial bone structure naturally. The tip allows precise placement (under eye, nose wings, cupid's bow highlight); the sides diffuse it instantly. Small torch (eyes): Crease work and smoky eye. The tip places color deep in the crease; the sides immediately fade it upward. Perfect for lower lash line diffusion. By bristle type: • Squirrel: weightless veil finish, zero risk of overloading • Elite goat: saturated, fast commercial blending (Colorful Dream, Black Style) • Sable: graphic precision with a torch tip • Taklon: hypoallergenic alternative for sensitive skin

Does the paint peel off CTR brush handles after using cleansers?

No. CTR handle lacquer is specifically engineered to resist the daily chemical exposure of professional salon use. Three-layer protection system: 1. Wood stabilization — Before any paint is applied, handles undergo deep drying and pressure-chamber treatment that removes every trace of residual moisture from wood pores. Unstabilized wood micro-expands and contracts under solvents, cracking lacquer from within. CTR's stabilized wood is geometrically static. 2. Triple adhesion primer — Three sequential layers of isolation primer are applied before any color, sealing wood pores completely and creating maximum bond between wood molecules and the decorative paint layer. 3. UV-polymerized lacquer (UV-coating) — The final protective layer is a specialized polymer compound cured under high-intensity UV lamps. UV polymerization creates a monolithic, chemically inert glaze that does not dissolve in ethanol, isopropyl alcohol, acetone, or surfactants. The ferrule-to-handle joint — the most vulnerable point — is sealed with chemical-resistant adhesive inside a deep-crimped bronze ferrule, preventing any solvent from penetrating underneath. Care tip: Dip bristle only (not the handle) into cleanser. Wipe the handle with a microfiber cloth after each client.