Štetec na plné krytie make-upom — Laserom upravená syntetika

€25,00 EUR

~~€28,00 EUR~~ €25,00 EUR

Zľava 10% Vypredané

Dane zahrnuté.

Na sklade

Doprava zadarmo pri objednávkach nad €49,00
30-dňové vrátenie
Bezplatné vzorky

Odporúčané produkty

Presná kozmetická špongia — Bezchybné rozmiešavanie make-upu a korektora

€10,00 EUR

~~€14,00 EUR~~ €10,00 EUR

Profesionálny štetec na pleť pre tekutý, krémový a práškový make-up

€25,00 EUR

~~€28,00 EUR~~ €25,00 EUR

Description

Navrhnutý pre make-up s vysokým krytím a aplikáciu púdru pri mokrom použití

Laserové ošetrenie je dokončovací proces, ktorý odstraňuje mikro-burrs and irregularities from the fibre tips, producing a surface significantly smoother than standard synthetic. On the skin, this translates to gentler contact and fewer visible streak lines during foundation application. The flat surface is designed for stippling motions that press product into the skin rather than dragging it across, which is what creates a second-skin finish rather than a painted one. The dense packing is what enables the brush to hold enough product for full-face application without reloading, and the wet-use capability turns the same tool into a powder foundation applicator for extra coverage on uneven skin.

Prémiové materiály, ktoré vydržia 8–10 rokov

Rukoväte štetcov CTR sú vyrobené z prémiových tvrdých driev — predovšetkým z vybraného afrického jaseňa a kanadského jelše — ktoré prechádzajú 20-ročným procesom zrenia a stabilizácie. Toto rozšírené zrenie odstraňuje všetku zvyškovú vlhkosť z dreva, čím ho robí úplne odolným voči vlhkosti, deformácii a zmrašteniu, a to aj v každodenných salónnych podmienkach. Ergonomická rovnováha hmotnosti znižuje únavu ruky počas viachodinových sedení. V kombinácii s bronzovými spojovacími prstencami japonskej kvality a systémom štetín Triple-Lock sú rukoväte CTR navrhnuté tak, aby vydržali 8–10 rokov profesionálneho každodenného používania.

Systém Triple-Lock — Nulové vypadávanie štetín

Profesionálne štetce CTR nevypadávajú počas aktívnej aplikácie líčenia ani pravidelného čistenia. Udržanie štetín sa dosahuje systémom Triple-Lock: (1) polymérové kaskádové lepidlo, ktoré natrvalo spája každý jednotlivý vlas; (2) silikónová tlmiaca vrstva, ktorá absorbuje tlak a zabraňuje lámaniu štetín pri základni; (3) japonský bronzový spojovací prstenec mechanicky zvlnený s klenotníckou presnosťou. Podobne ako nový kašmírový sveter, každý nový štetec z prírodných štetín môže pri prvých 1–2 použitiach uvoľniť 2–5 vlasov — krátkych vlasov, ktoré počas ručnej montáže úplne nedosiahli k lepiacej základni. Po prvom správnom umytí to natrvalo prestane.

Ručná montáž bez rezania

Všetky profesionálne štetce CTR sú vyrobené výhradne ručne — remeselníci vyberajú vlasy jednotlivo a ukladajú ich do presných foriem vlas po vlase, pričom zachovávajú nedotknutý prirodzený hrot každého jedného vlákna. Strojom rezané štetiny (používané v masovo vyrábaných štetcoch) odrezávajú najjemnejší, najmäkší hrot každého vlasu, čím zanechávajú tvrdé pahýle, ktoré škrabú pokožku a nanášajú líčenie v škvrnách. Ručne montované prirodzené hroty CTR sú desiatky ráz jemnejšie ako ľudský vlas — čo týmto štetcom dáva ich legendárnu kašmírovú mäkkosť a schopnosť rozmiešavať líčenie do bezchybného, plynulého finiša.

Čo je v balení

1 x Foundation Toning Brush - Laser-Treated Synthetic

Pre koho je táto sada?

Makeup artists and beauty enthusiasts seeking a second-skin foundation finish with advanced laser-treated fibres that eliminate micro-burrs for flawless results.

Najdôležitejšie body

⚡ Laser-Treated Fibres · 🧴 Cream & Powder Versatile · 🌬️ Hypoallergenic Pile · 📏 Larger Working Surface · 💧 Wet-Use Compatible · 🌿 Seasoned Wood Handle

Čo to je

A premium toning brush with a flat working surface, crafted from new-generation hypoallergenic synthetic pile that has been laser-treated for exceptional smoothness and gentle skin contact.

Čo robí

The W0611 features a flat working surface made of new-generation hypoallergenic synthetic pile that is laser-treated, which is what allows the brush to gently and evenly cover the skin with both creamy textures and powder decorative cosmetics. The working surface is larger than a standard foundation brush and very densely packed, yet remains soft and delicate on contact. The handle is made of seasoned wood, protected against drying and cracking through the years of daily salon use. This brush also handles dense foundation coverage beautifully: moisten the tips with water before dipping into powder, and you can work pressed or loose powder into the skin of the face for a full-coverage, skin-like finish.

Odporúčané použitie

For liquid or cream foundation, apply product to the flat surface and press into the skin with stippling motions, working outward from the centre of the face. For dense powder coverage, moisten the tips lightly with water or setting spray, pick up pressed powder, and press into the skin in the areas that need the most coverage. The flat surface is also ideal for cream blush, contour, and bronzer placement across larger facial zones.

Podrobnosti

Zobraziť úplné podrobnosti

Frequently Asked Questions

What makes laser-treated pile different from standard synthetic?

Laser treatment smooths the fibre tips at a microscopic level, removing the small irregularities that can streak product and irritate sensitive skin. The result is a noticeably softer contact surface and cleaner product deposition.

How do I use this brush wet with powder?

Moisten the bristle tips lightly with clean water or setting spray (do not soak the whole brush), then press the tips into pressed powder and stipple onto the skin. This delivers intensified coverage for a full-face finish.

Is this better than a beauty sponge for foundation?

Different finish. A sponge blends for a dewy skin-like effect; the W0611 delivers a more defined, higher-coverage finish with less product waste and faster application over larger areas.

Will this brush work for mineral foundation?

Yes, the dense flat surface handles loose mineral powder exceptionally well. Swirl into the powder, tap off excess, and buff onto the skin for smooth mineral coverage.

What wood are CTR brush handles made from?

CTR brush handles are crafted from premium hardwoods — primarily select African ash and Canadian alder — that undergo a 20-year aging and stabilization process. This extended aging removes all residual moisture from the wood, making it completely immune to humidity, warping, and shrinkage even under daily salon conditions. After stabilization, each handle is treated in pressure chambers with protective salts and resins, then finished with three layers of adhesion primer and a UV-polymerized lacquer that resists alcohol, acetone, and surfactants. The result is a handle that won't crack, peel, or swell from repeated washing or disinfectants. The ergonomic weight balance — deliberately shifted toward the bronze ferrule — reduces hand fatigue during multi-hour sessions. Paired with Japanese-grade bronze ferrules and our Triple-Lock bristle system, CTR handles are engineered to last 8–10 years of professional daily use.

Does the bristle shed?

No. CTR professional brushes do not shed during active makeup application or regular cleaning. Bristle retention is one of our defining quality standards, achieved through the Triple-Lock System: 1. Polymer cascade adhesive — The base of every bristle bundle is immersed in a high-tech elastic adhesive that bonds each individual hair permanently without hardening over time. 2. Silicone cushion layer — A thin silicone layer over the adhesive absorbs pressure and prevents bristle breakage at the base during heavy use. 3. Japanese bronze ferrule crimp — The entire assembly is placed inside a stamped bronze ferrule and mechanically crimped with jeweler's precision. Bronze neither expands from heat nor contracts from cold. Important: Like a new cashmere sweater, any new natural-bristle brush may release 2–5 hairs during the first 1–2 uses. These are "technological excess" — short hairs that didn't reach the adhesive base during hand-assembly. After the first proper wash, this stops permanently.

Are CTR bristles hand-assembled or machine-cut?

All CTR professional brushes are exclusively hand-assembled. We never use machine-cutting to shape bristle bundles — a practice that destroys the professional performance of any brush. The difference is fundamental: Machine-cut bristle (mass-market): Hairs are packed into the ferrule and mechanically trimmed to shape. This cuts off the finest, softest tip of each hair — the natural "peak." The result: stiff, scratchy stumps that irritate skin, damage the epidermis, and deposit makeup in blotches. CTR hand-assembled bristle (luxury standard): Artisans select hairs individually and lay them into precision molds hair by hair, preserving the untouched natural tip of every single fiber. The natural tip of CTR's squirrel or goat hair is dozens of times finer than a human hair. These preserved tips give CTR brushes their legendary cashmere softness and their ability to blend makeup into a flawless, seamless finish.

How should I care for my CTR brushes?

CTR high-end brush care falls into two categories: express cleaning between clients and deep washing. Express cleaning (daily): • For natural bristle (squirrel, goat): Use alcohol-free or low-alcohol brush wipes. Gently swipe the bristle across a textured cloth; dry time is 2–3 minutes. • For synthetic bristle (taklon, nylon): Alcohol-based express cleaners are safe and effective. • Critical rule: Never use medical-grade alcohol antiseptic on natural bristle — it instantly dries out the hair cuticle, making it brittle and stiff. Deep washing (every 1–2 weeks): • Natural bristle: Use gentle bar soap, professional brush shampoo, or sulfate-free shampoo. Once a month, apply a drop of regular hair conditioner for 1 minute after washing and rinse — this restores silkiness to squirrel and goat hair. • Synthetic bristle: Can tolerate stronger cleansers. Drying — the golden rule: Always dry brushes flat or bristle-side down, never upright in a cup. Water draining into the ferrule can soften even the strongest adhesive over time. Dry at room temperature — no radiators or hair dryers.

What is the proper technique for washing brushes?

Washing premium brushes correctly is a careful process — the wrong temperature or drying position can permanently damage bristle structure. Step-by-step Golden Standard: 1. Choose the right cleanser. Gentle soap or sulfate-free shampoo for natural bristle (squirrel, goat). For dense synthetic brushes used with cream products, pre-treat with a drop of cleansing oil to break down pigment, then follow with soap. 2. Always point bristle downward. Run cool or barely lukewarm water — hot water breaks down the adhesive. Hold the brush bristle-down at all times; water must not enter the metal ferrule. 3. Gentle circular lathering. Work the bristle in soft circular strokes on your palm or a silicone mat. Never press hard, squeeze the bundle into a fist, or scrub in random directions — this breaks hairs at the base and damages CTR's internal silicone cushion layer. 4. Rinse until clear. Hold bristle down and rinse under running water until completely clear. 5. Reshape the bristle. Blot gently with a soft towel, squeezing from base to tip. Never wring. Reshape the bundle by hand. 6. Dry flat. Lay brushes on a dry towel with bristle slightly overhanging the table edge. Never dry vertically bristle-up, and never near a radiator or hairdryer.

Why does the bristle shine?

The shine on CTR bristle signals premium quality — but its origin differs between natural and synthetic bristle. Natural bristle shine (squirrel, goat, sable): Shine is caused by high melanin content in the hair's cortex layer combined with an intact, undamaged cuticle. When the cuticle is healthy and lies flat — not stripped by harsh chemicals — it acts like a mirror, creating a deep, silky, living luster. CTR uses exclusively organic processing methods; aggressive acid dyeing or bleaching would destroy melanin and leave bristle porous, dull, and brittle. The shine you see is proof that the hair structure is fully preserved. Taklon shine: Taklon is a polyester fiber with a perfectly smooth surface that reflects light uniformly. CTR uses the latest generation of ultra-fine taklon, which produces a delicate, high-end glow — completely different from the cheap, plastic-looking shine of low-grade nylon found in mass-market brushes.

Is it normal for a few hairs to fall out during the first wash?

Yes — losing 2–5 hairs during the very first wash is completely normal with any natural-bristle brush. During hand-assembly, artisans build the bristle bundle hair by hair. Occasionally a very short hair near the bundle's center doesn't quite reach the adhesive base — it simply sits loose inside the "cap" of the brush. The first wash flushes these out. This is not a defect. It stops completely after the first wash. A defect would be: continued shedding on the 2nd, 3rd, and subsequent washes, or a visibly thinning bundle. This indicates poor-quality adhesive, insufficient ferrule crimp, or cut bristle — none of which apply to CTR brushes. CTR's quality controls eliminate defective shedding through three layers: Japanese bronze ferrule stamping with deep mechanical crimp; hand-selection of raw material (short or damaged hairs removed before bundle assembly); and 30-year-aged wood handles that never shrink or loosen the ferrule clamp. For the first wash: bristle pointing down, gentle circular motion on palm, horizontal drying at room temperature.

Are CTR brushes densely packed or soft and airy?

CTR brushes are available in all three density categories — density is a calculated technical parameter matched to specific makeup tasks. Soft, airy (veil density) Best for: loose powder, delicate highlights, dry blush, final shadow blending. Materials: Persian/Caucasian squirrel, long torch-shaped goat. The bundle springs and flexes easily, depositing product in a weightless, transparent layer. Medium, springy (standard density) Best for: pressed eyeshadow, crease definition, gradient blending, dry contour. Materials: Elite goat bristle in Colorful Dream and Black Style collections. Firm pigment pickup from cuticle scales, yet the hand-assembled tip remains soft and precise. Dense, monolithic (high-density) Best for: foundation, concealer, cream contour, lipstick, gel liner. Materials: High-tech taklon and nylon in Dark Sharm and Black Style collections. The dense, non-porous synthetic bundle polishes cream products into the skin for a "second skin" finish. All densities feature bronze ferrule and treated hardwood construction for equal durability.

Can CTR brush bristle cause allergies?

CTR brushes do not cause allergies. Here is why. 90% of "allergic reactions" attributed to brush bristle are actually two separate issues: 1. Mechanical irritation (not allergy): Machine-cut bristle stumps physically scratch and inflame skin, causing redness, flaking, and contact dermatitis. This is not an immune response to animal hair — it is a skin injury from sharp bristle ends. 2. Chemical reaction: Poor-quality dyes or preservatives on cheaply processed raw materials trigger true allergic responses. CTR standards eliminate both causes: • All natural bristle (goat, squirrel, fox, sable, Italian raccoon, black/grey/burgundy squirrel) undergoes multi-stage deep cleaning, degreasing, and sterilization before hand-assembly. All organic compounds and microorganisms are removed while preserving natural softness. • No-Cut hand-assembly means zero stiff stumps and zero mechanical skin injury. For confirmed allergy sufferers: CTR's Black Style and Dark Sharm collections feature taklon and nylon bristle. Nylon has a perfectly smooth, non-porous surface — completely hypoallergenic. Taklon mimics natural squirrel softness but is 100% synthetic and inert. Wood handles are treated with antiseptics in pressure chambers, preventing bacterial growth even under intensive daily cleaning.

Does shiny bristle mean it's natural hair or synthetic taklon?

Shine is not a reliable indicator of natural vs. synthetic — both can shine, for completely different reasons. Natural bristle that shines: The shine comes from high melanin content in the cortex (the hair's core) combined with a healthy, undamaged cuticle acting as a mirror. This is a premium quality marker. Examples of naturally shiny CTR bristle: black/grey squirrel (antracite mirror shine), sable and kolinsky (warm golden-brown luster), elite white goat (silky pearl sheen). If a natural brush looks dull and flat, it means the hair was processed with harsh bleaches or acid dyes that destroyed the melanin. Taklon that shines: Taklon's perfectly smooth polymer surface reflects light uniformly. CTR uses the latest-generation ultra-fine taklon, which produces a delicate, premium-looking glow — not the cheap "plastic" shine of low-grade mass-market nylon. How to tell them apart under magnification: Natural bristle has a scale structure on the surface (cuticle); taklon is mirror-smooth with no texture.

How soft is CTR bristle? (3-level classification)

CTR bristle softness is controlled by two fundamental factors: fiber thickness in microns (human hair ≈ 70–100 µm; CTR raw materials = 14.5–20.59 µm) and No-Cut hand-assembly (preserved natural tips — not machine-cut stumps). Level 1 — Extreme (weightless) softness Materials: black and grey squirrel, fox hair. Feel: like touching silk or liquid velvet. Zero stiffness. Ideal for transparent dry shadow layers, sheer highlights, and hypersensitive or mature skin. Level 2 — Silky softness with noble spring Materials: burgundy squirrel, royal sable, elite white goat (14.5–20.59 µm), premium taklon (Black Style collection). Feel: incredibly soft to the touch with enough snap for controlled color placement and blending. The sweet spot for most professional makeup work. Level 3 — Springy (functional) softness Materials: Italian raccoon, high-tech nylon (Dark Sharm collection). Feel: doesn't scratch, but firm enough for cream textures, gel liners, and graphic precision work.

Does the CTR foundation brush pack product densely?

Yes. CTR foundation brushes are engineered for maximum product transfer with zero waste. Dense packing means product reaches skin rather than being absorbed into bristle. CTR achieves this through: 1. High-Density hand-assembly — thousands of fibers are laid individually by artisans, creating a monolithic, void-free bundle that acts as a single elastic pad. 2. Non-porous taklon/nylon bristle — smooth synthetic fibers don't absorb product internally. 100% of the product placed on the bristle is transferred to skin. Result: 2–3x less product wasted compared to a sponge or porous natural-hair brush. 3. No-Cut natural tips — despite maximum density, CTR bristle tips are silk-soft. No rough cut stumps that would push product sideways and create streaks. What dense packing delivers: • Polishing effect: bristle doesn't flex sideways; it polishes cream into pores and fine lines, creating a "second skin" finish. • Variable coverage: spreading strokes = medium buildable layer; tapping/stippling = full coverage. CTR foundation brushes with high-density packing: W0596, W0611, W0644.

Does the CTR foundation brush leave streaks?

No. Streaks are caused by machine-cut bristle that rakes and drags product unevenly. CTR eliminates streaks through three factors: 1. No-Cut technology — Every hair's natural tip is preserved. Silk-soft endings glide across skin and stretch product into a microscopically thin, even layer — not a harsh track. 2. High-Density uniform packing — The dense bundle doesn't flex sideways mid-stroke. Every bristle maintains equal pressure and deposits an unbroken, uniform layer. 3. Non-porous synthetic bristle (taklon/nylon) — Doesn't absorb product mid-application; never clumps or creates dry spots. For round buffers/kabuki shapes: Circular polishing motions distribute product seamlessly, filling every pore for an airbrushed finish. Bronze ferrules lock bundle geometry permanently; 30-year-aged wood handles never loosen the ferrule clamp. CTR no-streak foundation brushes: W0596, W0611, W0644, W0710 (correction and tone brush).

Does the paint peel off CTR brush handles after using cleansers?

No. CTR handle lacquer is specifically engineered to resist the daily chemical exposure of professional salon use. Three-layer protection system: 1. Wood stabilization — Before any paint is applied, handles undergo deep drying and pressure-chamber treatment that removes every trace of residual moisture from wood pores. Unstabilized wood micro-expands and contracts under solvents, cracking lacquer from within. CTR's stabilized wood is geometrically static. 2. Triple adhesion primer — Three sequential layers of isolation primer are applied before any color, sealing wood pores completely and creating maximum bond between wood molecules and the decorative paint layer. 3. UV-polymerized lacquer (UV-coating) — The final protective layer is a specialized polymer compound cured under high-intensity UV lamps. UV polymerization creates a monolithic, chemically inert glaze that does not dissolve in ethanol, isopropyl alcohol, acetone, or surfactants. The ferrule-to-handle joint — the most vulnerable point — is sealed with chemical-resistant adhesive inside a deep-crimped bronze ferrule, preventing any solvent from penetrating underneath. Care tip: Dip bristle only (not the handle) into cleanser. Wipe the handle with a microfiber cloth after each client.