Pudrový, svinčový a kontúrny kefka W0648 – Taklon

€25,00 EUR

~~€35,00 EUR~~ €25,00 EUR

Zľava 28% Vypredané

Dane zahrnuté.

Na sklade

Doprava zadarmo pri objednávkach nad €49,00
30-dňové vrátenie
Bezplatné vzorky

Odporúčané produkty

Paleta jemne fokusujúceho fixačného púdru — bez efektu odrazu blesku — DUNA

€45,00 EUR

~~€50,00 EUR~~ €45,00 EUR

Description

Navrhnutý pre viac-textúrovú aplikáciu a všestranné kontúrovanie tváre

Väčšina štetcov na tvár sa zaväzuje buď k suchým alebo mokrým textúram, pretože prirodzural hair absorbs cream product and synthetic hair struggles with powder pickup. Taklon resolves the trade-off: its fibre surface is smooth enough to move cream without absorbing, yet structured enough (through its imitation scale pattern) to pick up dry powder like natural hair does. This is what makes the W0648 the rare brush that can handle an entire face routine: powder foundation, cream or powder contour, cream or powder blush, and setting powder. The fluffy shape diffuses product softly, which is essential for the thin, even coverage that separates polished makeup from the heavy, cakey finishes that flat brushes can produce.

Prémiové materiály, ktoré vydržia 8–10 rokov

Rukoväte štetcov CTR sú vyrobené z prémiových tvrdých driev — predovšetkým z vybraného afrického jaseňa a kanadského jelše — ktoré prechádzajú 20-ročným procesom zrenia a stabilizácie. Toto rozšírené zrenie odstraňuje všetku zvyškovú vlhkosť z dreva, čím ho robí úplne odolným voči vlhkosti, deformácii a zmrašteniu, a to aj v každodenných salónnych podmienkach. Ergonomická rovnováha hmotnosti znižuje únavu ruky počas viachodinových sedení. V kombinácii s bronzovými spojovacími prstencami japonskej kvality a systémom štetín Triple-Lock sú rukoväte CTR navrhnuté tak, aby vydržali 8–10 rokov profesionálneho každodenného používania.

Systém Triple-Lock — Nulové vypadávanie štetín

Profesionálne štetce CTR nevypadávajú počas aktívnej aplikácie líčenia ani pravidelného čistenia. Udržanie štetín sa dosahuje systémom Triple-Lock: (1) polymérové kaskádové lepidlo, ktoré natrvalo spája každý jednotlivý vlas; (2) silikónová tlmiaca vrstva, ktorá absorbuje tlak a zabraňuje lámaniu štetín pri základni; (3) japonský bronzový spojovací prstenec mechanicky zvlnený s klenotníckou presnosťou. Podobne ako nový kašmírový sveter, každý nový štetec z prírodných štetín môže pri prvých 1–2 použitiach uvoľniť 2–5 vlasov — krátkych vlasov, ktoré počas ručnej montáže úplne nedosiahli k lepiacej základni. Po prvom správnom umytí to natrvalo prestane.

Ručná montáž bez rezania

Všetky profesionálne štetce CTR sú vyrobené výhradne ručne — remeselníci vyberajú vlasy jednotlivo a ukladajú ich do presných foriem vlas po vlase, pričom zachovávajú nedotknutý prirodzený hrot každého jedného vlákna. Strojom rezané štetiny (používané v masovo vyrábaných štetcoch) odrezávajú najjemnejší, najmäkší hrot každého vlasu, čím zanechávajú tvrdé pahýle, ktoré škrabú pokožku a nanášajú líčenie v škvrnách. Ručne montované prirodzené hroty CTR sú desiatky ráz jemnejšie ako ľudský vlas — čo týmto štetcom dáva ich legendárnu kašmírovú mäkkosť a schopnosť rozmiešavať líčenie do bezchybného, plynulého finiša.

Čo je v balení

1 x Powder Blush and Contour Brush - Round Synthetic Taklon (W0648)

Pre koho je táto sada?

Makeup artists and beauty enthusiasts who want one versatile fluffy synthetic brush that handles the entire face routine from foundation to contour.

Najdôležitejšie body

☁️ Fluffy Multi-Purpose · 💧 Dry & Cream Compatible · 📏 Thin Even Coverage · 🎨 Full Face or Zonal · ✨ Contouring Specialist · 👩‍🎨 Professional Grade

Čo to je

A fluffy professional brush in taklon pile engineered for both dry and oil-based textures, built to apply powder with a thin, even veil across the full face or target zones, and equally suited for cream or powder contouring work.

Čo robí

The W0648 is a fluffy brush built to handle both dry and oil-based textures, which makes it one of the most versatile tools in the CTR face brush range. It applies powder to the full face or zonally with maximally thin, even coverage, without overloading the skin or concentrating product in patches. The brush is also built for quality face contouring with both dry and cream products, which eliminates the need to switch tools when moving between powder contour and cream contour within the same makeup sequence. Taklon fibres neither absorb cream product into the fibre core nor grab dry powder unevenly, which is what enables the multi-texture versatility.

Odporúčané použitie

For full-face powder setting, load the brush, tap off excess, and buff across the skin in circular motions. For targeted powder application (under eye, T-zone), press rather than sweep to deposit product in place. For cream contour, pick up product on the fluffy tip and tap into the hollows beneath the cheekbones, then blend with light circular motions. For powder contour, sweep gently along the contour lines and blend into the surrounding skin.

Podrobnosti

Zobraziť úplné podrobnosti

Frequently Asked Questions

Is it really possible to use one brush for both powder and cream products?

Yes, taklon is specifically engineered for multi-texture work. Clean between switches if colour transfer is a concern, but the fibre itself handles both without absorbing or clumping.

How is the W0648 different from the W0611 toning brush?

The W0611 is a flat laser-treated brush built for foundation and full coverage. The W0648 is a fluffy brush built for powder setting, contouring, and targeted application. The W0611 packs coverage, the W0648 diffuses it.

Will cream product leave residue in the taklon?

Regular cleaning prevents residue. Wash after each cream-product use with brush soap, rinse thoroughly, and dry flat to preserve shape.

Can I use this for blush application?

Yes, the fluffy head and multi-texture capability make the W0648 excellent for both cream and powder blush. For blush-specific precision, the angled W0179 gives more cheekbone definition.

What wood are CTR brush handles made from?

CTR brush handles are crafted from premium hardwoods — primarily select African ash and Canadian alder — that undergo a 20-year aging and stabilization process. This extended aging removes all residual moisture from the wood, making it completely immune to humidity, warping, and shrinkage even under daily salon conditions. After stabilization, each handle is treated in pressure chambers with protective salts and resins, then finished with three layers of adhesion primer and a UV-polymerized lacquer that resists alcohol, acetone, and surfactants. The result is a handle that won't crack, peel, or swell from repeated washing or disinfectants. The ergonomic weight balance — deliberately shifted toward the bronze ferrule — reduces hand fatigue during multi-hour sessions. Paired with Japanese-grade bronze ferrules and our Triple-Lock bristle system, CTR handles are engineered to last 8–10 years of professional daily use.

Does the bristle shed?

No. CTR professional brushes do not shed during active makeup application or regular cleaning. Bristle retention is one of our defining quality standards, achieved through the Triple-Lock System: 1. Polymer cascade adhesive — The base of every bristle bundle is immersed in a high-tech elastic adhesive that bonds each individual hair permanently without hardening over time. 2. Silicone cushion layer — A thin silicone layer over the adhesive absorbs pressure and prevents bristle breakage at the base during heavy use. 3. Japanese bronze ferrule crimp — The entire assembly is placed inside a stamped bronze ferrule and mechanically crimped with jeweler's precision. Bronze neither expands from heat nor contracts from cold. Important: Like a new cashmere sweater, any new natural-bristle brush may release 2–5 hairs during the first 1–2 uses. These are "technological excess" — short hairs that didn't reach the adhesive base during hand-assembly. After the first proper wash, this stops permanently.

Are CTR bristles hand-assembled or machine-cut?

All CTR professional brushes are exclusively hand-assembled. We never use machine-cutting to shape bristle bundles — a practice that destroys the professional performance of any brush. The difference is fundamental: Machine-cut bristle (mass-market): Hairs are packed into the ferrule and mechanically trimmed to shape. This cuts off the finest, softest tip of each hair — the natural "peak." The result: stiff, scratchy stumps that irritate skin, damage the epidermis, and deposit makeup in blotches. CTR hand-assembled bristle (luxury standard): Artisans select hairs individually and lay them into precision molds hair by hair, preserving the untouched natural tip of every single fiber. The natural tip of CTR's squirrel or goat hair is dozens of times finer than a human hair. These preserved tips give CTR brushes their legendary cashmere softness and their ability to blend makeup into a flawless, seamless finish.

How should I care for my CTR brushes?

CTR high-end brush care falls into two categories: express cleaning between clients and deep washing. Express cleaning (daily): • For natural bristle (squirrel, goat): Use alcohol-free or low-alcohol brush wipes. Gently swipe the bristle across a textured cloth; dry time is 2–3 minutes. • For synthetic bristle (taklon, nylon): Alcohol-based express cleaners are safe and effective. • Critical rule: Never use medical-grade alcohol antiseptic on natural bristle — it instantly dries out the hair cuticle, making it brittle and stiff. Deep washing (every 1–2 weeks): • Natural bristle: Use gentle bar soap, professional brush shampoo, or sulfate-free shampoo. Once a month, apply a drop of regular hair conditioner for 1 minute after washing and rinse — this restores silkiness to squirrel and goat hair. • Synthetic bristle: Can tolerate stronger cleansers. Drying — the golden rule: Always dry brushes flat or bristle-side down, never upright in a cup. Water draining into the ferrule can soften even the strongest adhesive over time. Dry at room temperature — no radiators or hair dryers.

What is the proper technique for washing brushes?

Washing premium brushes correctly is a careful process — the wrong temperature or drying position can permanently damage bristle structure. Step-by-step Golden Standard: 1. Choose the right cleanser. Gentle soap or sulfate-free shampoo for natural bristle (squirrel, goat). For dense synthetic brushes used with cream products, pre-treat with a drop of cleansing oil to break down pigment, then follow with soap. 2. Always point bristle downward. Run cool or barely lukewarm water — hot water breaks down the adhesive. Hold the brush bristle-down at all times; water must not enter the metal ferrule. 3. Gentle circular lathering. Work the bristle in soft circular strokes on your palm or a silicone mat. Never press hard, squeeze the bundle into a fist, or scrub in random directions — this breaks hairs at the base and damages CTR's internal silicone cushion layer. 4. Rinse until clear. Hold bristle down and rinse under running water until completely clear. 5. Reshape the bristle. Blot gently with a soft towel, squeezing from base to tip. Never wring. Reshape the bundle by hand. 6. Dry flat. Lay brushes on a dry towel with bristle slightly overhanging the table edge. Never dry vertically bristle-up, and never near a radiator or hairdryer.

Why does the bristle shine?

The shine on CTR bristle signals premium quality — but its origin differs between natural and synthetic bristle. Natural bristle shine (squirrel, goat, sable): Shine is caused by high melanin content in the hair's cortex layer combined with an intact, undamaged cuticle. When the cuticle is healthy and lies flat — not stripped by harsh chemicals — it acts like a mirror, creating a deep, silky, living luster. CTR uses exclusively organic processing methods; aggressive acid dyeing or bleaching would destroy melanin and leave bristle porous, dull, and brittle. The shine you see is proof that the hair structure is fully preserved. Taklon shine: Taklon is a polyester fiber with a perfectly smooth surface that reflects light uniformly. CTR uses the latest generation of ultra-fine taklon, which produces a delicate, high-end glow — completely different from the cheap, plastic-looking shine of low-grade nylon found in mass-market brushes.

Is it normal for a few hairs to fall out during the first wash?

Yes — losing 2–5 hairs during the very first wash is completely normal with any natural-bristle brush. During hand-assembly, artisans build the bristle bundle hair by hair. Occasionally a very short hair near the bundle's center doesn't quite reach the adhesive base — it simply sits loose inside the "cap" of the brush. The first wash flushes these out. This is not a defect. It stops completely after the first wash. A defect would be: continued shedding on the 2nd, 3rd, and subsequent washes, or a visibly thinning bundle. This indicates poor-quality adhesive, insufficient ferrule crimp, or cut bristle — none of which apply to CTR brushes. CTR's quality controls eliminate defective shedding through three layers: Japanese bronze ferrule stamping with deep mechanical crimp; hand-selection of raw material (short or damaged hairs removed before bundle assembly); and 30-year-aged wood handles that never shrink or loosen the ferrule clamp. For the first wash: bristle pointing down, gentle circular motion on palm, horizontal drying at room temperature.

Are CTR brushes densely packed or soft and airy?

CTR brushes are available in all three density categories — density is a calculated technical parameter matched to specific makeup tasks. Soft, airy (veil density) Best for: loose powder, delicate highlights, dry blush, final shadow blending. Materials: Persian/Caucasian squirrel, long torch-shaped goat. The bundle springs and flexes easily, depositing product in a weightless, transparent layer. Medium, springy (standard density) Best for: pressed eyeshadow, crease definition, gradient blending, dry contour. Materials: Elite goat bristle in Colorful Dream and Black Style collections. Firm pigment pickup from cuticle scales, yet the hand-assembled tip remains soft and precise. Dense, monolithic (high-density) Best for: foundation, concealer, cream contour, lipstick, gel liner. Materials: High-tech taklon and nylon in Dark Sharm and Black Style collections. The dense, non-porous synthetic bundle polishes cream products into the skin for a "second skin" finish. All densities feature bronze ferrule and treated hardwood construction for equal durability.

Can CTR brush bristle cause allergies?

CTR brushes do not cause allergies. Here is why. 90% of "allergic reactions" attributed to brush bristle are actually two separate issues: 1. Mechanical irritation (not allergy): Machine-cut bristle stumps physically scratch and inflame skin, causing redness, flaking, and contact dermatitis. This is not an immune response to animal hair — it is a skin injury from sharp bristle ends. 2. Chemical reaction: Poor-quality dyes or preservatives on cheaply processed raw materials trigger true allergic responses. CTR standards eliminate both causes: • All natural bristle (goat, squirrel, fox, sable, Italian raccoon, black/grey/burgundy squirrel) undergoes multi-stage deep cleaning, degreasing, and sterilization before hand-assembly. All organic compounds and microorganisms are removed while preserving natural softness. • No-Cut hand-assembly means zero stiff stumps and zero mechanical skin injury. For confirmed allergy sufferers: CTR's Black Style and Dark Sharm collections feature taklon and nylon bristle. Nylon has a perfectly smooth, non-porous surface — completely hypoallergenic. Taklon mimics natural squirrel softness but is 100% synthetic and inert. Wood handles are treated with antiseptics in pressure chambers, preventing bacterial growth even under intensive daily cleaning.

Does shiny bristle mean it's natural hair or synthetic taklon?

Shine is not a reliable indicator of natural vs. synthetic — both can shine, for completely different reasons. Natural bristle that shines: The shine comes from high melanin content in the cortex (the hair's core) combined with a healthy, undamaged cuticle acting as a mirror. This is a premium quality marker. Examples of naturally shiny CTR bristle: black/grey squirrel (antracite mirror shine), sable and kolinsky (warm golden-brown luster), elite white goat (silky pearl sheen). If a natural brush looks dull and flat, it means the hair was processed with harsh bleaches or acid dyes that destroyed the melanin. Taklon that shines: Taklon's perfectly smooth polymer surface reflects light uniformly. CTR uses the latest-generation ultra-fine taklon, which produces a delicate, premium-looking glow — not the cheap "plastic" shine of low-grade mass-market nylon. How to tell them apart under magnification: Natural bristle has a scale structure on the surface (cuticle); taklon is mirror-smooth with no texture.

How soft is CTR bristle? (3-level classification)

CTR bristle softness is controlled by two fundamental factors: fiber thickness in microns (human hair ≈ 70–100 µm; CTR raw materials = 14.5–20.59 µm) and No-Cut hand-assembly (preserved natural tips — not machine-cut stumps). Level 1 — Extreme (weightless) softness Materials: black and grey squirrel, fox hair. Feel: like touching silk or liquid velvet. Zero stiffness. Ideal for transparent dry shadow layers, sheer highlights, and hypersensitive or mature skin. Level 2 — Silky softness with noble spring Materials: burgundy squirrel, royal sable, elite white goat (14.5–20.59 µm), premium taklon (Black Style collection). Feel: incredibly soft to the touch with enough snap for controlled color placement and blending. The sweet spot for most professional makeup work. Level 3 — Springy (functional) softness Materials: Italian raccoon, high-tech nylon (Dark Sharm collection). Feel: doesn't scratch, but firm enough for cream textures, gel liners, and graphic precision work.

What is the CTR torch-shaped brush best used for?

The torch shape (tapered bundle — wide at base, narrowing to a pointed tip) is the most versatile shape in professional makeup. It performs two opposite functions at once: • The tip (peak): Applies pigment precisely and pointedly — ideal for placing color deep in the crease, detailing, or accent work. • The sides ("cheeks"): Spread and diffuse pigment softly when pressure increases — creating instant, smooth transitions. Large torch (face): Powder, blush, contour, highlight. The tapered shape follows facial bone structure naturally. The tip allows precise placement (under eye, nose wings, cupid's bow highlight); the sides diffuse it instantly. Small torch (eyes): Crease work and smoky eye. The tip places color deep in the crease; the sides immediately fade it upward. Perfect for lower lash line diffusion. By bristle type: • Squirrel: weightless veil finish, zero risk of overloading • Elite goat: saturated, fast commercial blending (Colorful Dream, Black Style) • Sable: graphic precision with a torch tip • Taklon: hypoallergenic alternative for sensitive skin

Does the paint peel off CTR brush handles after using cleansers?

No. CTR handle lacquer is specifically engineered to resist the daily chemical exposure of professional salon use. Three-layer protection system: 1. Wood stabilization — Before any paint is applied, handles undergo deep drying and pressure-chamber treatment that removes every trace of residual moisture from wood pores. Unstabilized wood micro-expands and contracts under solvents, cracking lacquer from within. CTR's stabilized wood is geometrically static. 2. Triple adhesion primer — Three sequential layers of isolation primer are applied before any color, sealing wood pores completely and creating maximum bond between wood molecules and the decorative paint layer. 3. UV-polymerized lacquer (UV-coating) — The final protective layer is a specialized polymer compound cured under high-intensity UV lamps. UV polymerization creates a monolithic, chemically inert glaze that does not dissolve in ethanol, isopropyl alcohol, acetone, or surfactants. The ferrule-to-handle joint — the most vulnerable point — is sealed with chemical-resistant adhesive inside a deep-crimped bronze ferrule, preventing any solvent from penetrating underneath. Care tip: Dip bristle only (not the handle) into cleanser. Wipe the handle with a microfiber cloth after each client.